1/2" G-209A Alloy Screw Pin Anchor Shackle | 3.3T S-252 Clip sizes up through 1-1/2

Clip sizes up through 1-1/2 have rolled threads

Meets or exceeds all requirements of ASME B30

Refer to page 87 for Crosby COLD TUFF shackles that meet the additional requirements of DNV rules for certification of lifting applications - Loose Gear

and lifting lugs

Deep straight throat permits efficient handling of flat plates or large cylindrical shapes

1/2" G-209A Alloy Screw Pin Anchor Shackle | 3.3T S-252 Clip sizes up through 1-1/2Capacities 2 thru 21 metric tons. Meets performance requirements of Grade 8 shackles. Forged Alloy Steel Quenched and Tempered, with alloy pins. Working Load Limit permanently shown on every shackle. Hot Dip Galvanized. Sizes 3 8 inch and below are mechanically galvanized. Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification. Charges for proof testing and certification